Polypac I-400 is a very effective primary coagulant for water and waste water clarification. The product can be used to produce low turbidity waters in influent and effluent water clarification. The product can also be used for emulsion breaking applications or phosphate removal.
Polypac I-400 is a liquid inorganic coagulant.
Properties
Appearance : clear, colourless liquid
Density (kg/m3) : 1340
pH (15% solution) : 4.2
Flash Point : none
These values are to be seen as typical values and should not be con¬sidered as specifications.
Application
This application should be continuously metered as a solution, (10%) through a mixer or other device to enable effective coagulation prior to addition of flocculant.
Dosage
Typical addition levels for raw water clarification are 1- 10 ppm. For industrial wastewater treatment dosage levels range from 10-1000 ppm depending on the application.
Best results are obtained when the product is diluted at least ten times prior to use. This dilution should be stored at a temperature between 4-35°C and should be used within three (3) days.
Recommended materials for storage and handling are glass, PVC, PP, PE and epoxy or rubber lined stainless steel.
Polypac I-400 will retain its activity in storage for periods of at least 12 months
Handling
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with plenty of water. After eye contact seek medical advice.
In case of spillage, absorb with sand or other absor-bent materials and sweep up. Then flush the area with water.
Before use review the Material Safety Data Sheet for additional information.
Storage and Handling
- Store in original containers.
- Keep containers securely sealed.
- Store in a cool, dry, well-ventilated area.
- Store away from incompatible materials and foodstuff containers.
Packaging
This product is available in a variety of packaging sizes such as pails, drums, bulk, and Intermediate Bulk Containers (IBC). Your Icbina representative will recommend the appropriate packaging for the application.
Important Information
Typical Properties: Refer to MSDS.
Regulatory Information: Please refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety: Icbina maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Icbina products in your facilities.