Icbina Pty Ltd is a wholly owned Australian company totally committed to innovative chemical and engineering solutions for the water treatment and membrane services industry.

  • Header

Polypac I-294

Polypac I-294 is a liquid coagulant widely used in the following areas:

  • colour removal
  • vegetable oil waste water treatment
  • inlet water clarification

Polypac I-294 is designed to improve the perform-ance of clarifiers, tertiary sand filters and vacuum fil-ters. It performs well in chlorinated water and it can replace inorganic coagulants, such as alum or ferric chloride, with the following advantages:

  • It does not consume alkalinity, thus it will not reduce the pH of the treated water
  • It is an organic polyelectrolyte and it does not add sulphates or chlorides to the treated water
  • Polypac I-294 is a medium molecular weight, liquid organic coagulant. The medium molecular weight allows rapid filtration without filter blocking.

Properties

Appearance           : viscous amber liquid
Density (kg/m3)    : 1160
pH (neat)              : 5.5
Flash Point            : none

These values are to be seen as typical values and should not be con¬sidered as specifications.

Application

This application should be continuously metered as a solution, (10%) through a mixer or other device to enable effective coagulation prior to addition of flocculant.

Dosage

Typical treatment levels range between 2-6 ppm for clarification, 100-500 ppm for colour removal and emulsion breaking and 5-50 kg/ton dry solids for sludge dewatering. The recommended materials for storage and handling are glass, plastic and epoxy or rubber lined stainless steel equipment.

Polyfloc I-294 will retain its activity in storage for periods up to 12 months.

Polypac I-294 is FDA acceptable in accordance with 21 C.F.R., Part 173 § 173.60.

Handling

Wear suitable protective gloves and safety goggles. In case of contact immediately flush with plenty of water. After eye contact seek medical advice .In case of spillage, absorb with sand or other absorbent materials and sweep up. Then flush the area with water. The product should be stored at a temperature between 5-25°C.
Before use review the Material Safety Data Sheet for additional information.

Storage and Handling

  • Store in original containers.
  • Keep containers securely sealed.
  • Store in a cool, dry, well-ventilated area.
  • Store away from incompatible materials and foodstuff containers.

Packaging

This product is available in a variety of packaging sizes such as pails, drums, bulk, and Intermediate Bulk Containers (IBC).  Your Icbina representative will recommend the appropriate packaging for the application.

Important Information

Typical Properties:  Refer to MSDS.

Regulatory Information:  Please refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.

Safety:  Icbina maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.

Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Icbina products in your facilities.