Polypac I-444 is a highly effective organic coagulant for water and waste water clarification. It can be used in place of conventional inorganic coagulants to produce low turbidity waters in influent water and effluent wastewater clarifications.
Polypac I-444 is also effective in oily wastewater and suitable for potable water treatment.
The product can be used to produce low turbidity waters in influent and effluent water clarification. The product can also be used for emulsion breaking applications or phosphate removal.
Polypac I-444 coagulant is a medium molecular weight, highly charged cationic liquid polymer.
Properties
Appearance : clear yellow liquid
Density (kg/m3) : 1090
pH (neat) : 6.0
Flash Point : none
These values are to be seen as typical values and should not be con¬sidered as specifications.
Application
This application should be continuously metered as a solution, (10%) through a mixer or other device to enable effective coagulation prior to addition of flocculant.
Dosage
Typical addition levels for raw water industrial waste-water treatment range from 5-100 ppm. The dilution should be used within three (3) days.
Polypac I-444 is accepted by the U.S. Environ¬mental Protection Agency as coagulant in potable water treatment at a maximum concentration of 20 ppm.
The recommended materials for storage and han¬dling are glass, plastic, epoxy or rubber lined stainless steel equipment.
Handling
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with plenty of water. After eye contact seek medical advice .In case of spillage, absorb with sand or other absor-bent materials and sweep up. Then flush the area with water. The product should be stored at a temperature between 5-25°C.
Before use review the Material Safety Data Sheet for additional information.
Storage and Handling
- Store in original containers.
- Keep containers securely sealed.
- Store in a cool, dry, well-ventilated area.
- Store away from incompatible materials and foodstuff containers.
Packaging
This product is available in a variety of packaging sizes such as pails, drums, bulk, and Intermediate Bulk Containers (IBC). Your Icbina representative will recommend the appropriate packaging for the application.
Important Information
Typical Properties: Refer to MSDS.
Regulatory Information: Please refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety: Icbina maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Icbina products in your facilities.