Polypac I-495 is a highly effective organic coagulant for water and waste water clarification. It can be used in place of conventional inorganic coagulants to produce low turbidity waters in influent water and effluent wastewater clarifications.

Polypac I-400 is also effective in oily wastewater

Polypac I-495 coagulant is a medium molecular weight, highly charged cationic liquid polymer

Properties

Appearance            : viscous amber liquid
Density (kg/m3)     : 1160
Viscosity (cps)        : 5000
pH                         : 6.0

These data are to be seen as typical values and should not be considered as specifications.

Application

This application should be continuously metered as a solution, (10%) through a mixer or other device to enable effective coagulation prior to addition of flocculant.

Dosage

Typical addition levels for raw water and industrial wastewater treatment range from 5-100 ppm. Best results are obtained when the product is diluted at least 20:1 prior to use. The dilution should be used within one day.

Polypac I-495 should be stored at temperatures between 4-35°C. Low temperatures may create feeding difficulty due to increased product viscosity. If freezing occurs, the product will regain its effectiveness with a gradual increase in temperature and mild agitation.

The recommended materials for storage and handling are glass, plastic, epoxy or rubber lined stainless steel equipment.                                                             

Handling

Wear suitable gloves and safety goggles. In case of contact, immediately flush with plenty of water. After eye contact seek medical advice. In case of spillage floor may become slippery. Sprinkle with industrial floor absorbent or sawdust. Clean up procedure: Scoop up into a suitable container and wash remainder away with plenty of water (large quantities should not be flushed into the sewer). If the floor remains slippery, clean the area with an industrial detergent.

Before use review the Material Safety Data Sheet for additional information.   

Storage and Handling

• Store in original containers.
• Keep containers securely sealed.
• Store in a cool, dry, well-ventilated area.
• Store away from incompatible materials and foodstuff containers.

Packaging

This product is available in a variety of packaging sizes such as pails, drums, bulk, and Intermediate Bulk Containers (IBC). 

Your Icbina representative will recommend the appropriate packaging for the application.

Important Information

Typical Properties:  Refer to MSDS.

Regulatory Information:  Please refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.

Safety:  Icbina maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.

Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Icbina products in your facilities.