Description
Polyfloc A – 10 is highly effective as a coagulant aid for potable, raw water and industrial waste water clarification.
This polymer has also found wide usage in many in-dustrial processes where rapid and complete liquid/ solids separation is desired. This highly versatile poly¬mer is effective over a wide pH-range.
Properties
Polyfloc A- 10 is a high molecular weight medium anionic polyelectrolyte suited for use in many diversified areas.
Appearance : white solid
pH (0.5% solution) : 6.5
Residual monomer (%) : 0.02
These data are to be seen as typical values and should not be consid¬ered as specifications.
Application
As coagulant aid, the recommended dosage of this polymer is normally in the range of 0.1 -10 ppm. The temperature and suspended solids content of the treated medium will have an effect on the dosage requirement. The product should be dissolved prior to use.
As much as a 0.5% stock solution can be prepared with cold water. Warm or hot water is not recom¬mended for dissolving this product. High speed agita¬tion is required for 30 minutes to insure adequate dis¬solution.
Dilute polymer solutions should be used within two (2) days. The recommended materials for storage and handling are plastic, glass, epoxy lined or stainless steel equipment.
Handling
Polyfloc A - 10 should be stored in a cool, dry place. Do not breathe dust. Wear a suitable dustmask. Wear suitable gloves and use dustproof goggles.
In case of spillage the floor may become slippery. Sprinkle with industrial floor absorbent or sawdust. Clean-up procedure: scoop up into a suitable container and wash remainder away with plenty of water (large quantities should not be flushed into the sewer. If the floor remains slippery, clean the area with an industrial detergent.
Before use review the Material Safety Data Sheet for additional information.
Storage and Handling
• Store in original containers.
• Keep containers securely sealed.
• Store in a cool, dry, well-ventilated area.
• Store away from incompatible materials and foodstuff containers.
Packaging
This product is available in 25kg bags (30 to a pallet) or 750 kg Bulk Bags.
Important Information
Typical Properties: Refer to MSDS.
Regulatory Information: Please refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety: Icbina maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Icbina products in your facilities.