BioKlen 140 microbiocide is a broad spectrum anti-microbial product designed specifically for control of slime-forming bacteria, sulfatereducing bacteria and algae in industrial water systems like air washer systems, recirculating cooling water systems, closed recirculating water systems, pasteurisers and membrane separation systems . It is effective across a broad pH range, especially at higher pH (<9.5) and has some dispersing capabilities. BioKlen 140 has a good environmental profile.
Properties
• Broad spectrum activity so very effective against aerobic and anaerobic organisms.
• Effective against SRB and unaffected by H2S. This results in excellent performance in systems heavily fouled with SRB or where H2S is present.
• Immiscible with oil and very effective in oil contaminated systems.
• Functional over a broad pH and temperature range which result in a very flexible biocide not restricted by most system conditions
• Good environmental profile.
Appearance : Liquid, transparent, colorless
Odour : Sharp fruity, medicinal
Boiling Point : 100.5 °C at 1013 kPa
Freezing Point : -10 °C
Density : 1058-1063 kg/m3 at 20 °C
Flashpoint : None
These data are to be seen as typical values and should not be considered as specifications.
Feeding
The Icbina Water Technologies Membrane Technicians will define the optimum product dosage for any given water quality. In calculating dosage rates, membrane specifications, product capability, operational data and feedwater quality are considered.
For membrane separation systems BioKlen 140 should be applied discontinuously to the feed water prior to the membranes.
The dosage rate depends upon the type of system and the severity of fouling. Typical dosages vary between 30-400 ppm.
The optimum dosage point is into the feed water line, upstream of the high-pressure pumps and ensuring a good mixing with the feedwater.
Corrosion resistant dosing equipment is required. Suitable equipment materials are 316L stainless steel PE and PVC.
Handling
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seek medical advice.
Small spills can be flushed with water. Large spills should be collected for disposal.
Before use review the Material Safety Data Sheet for additional information.
Use BioKlen 140 safely. Always read label and product information before use.
Before use review the Material Safety Data Sheet for additional information.
Packaging
This product is available in a variety of packaging sizes such as pails, drums, bulk, and Intermediate Bulk Containers (IBC). Your Icbina representative will recommend the appropriate packaging for the application.
Regulatory Information: Please refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety: Icbina Water Technologies maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Icbina products in your facilities.