MemKlen MC-120 is a cleaner for waterborne depos¬its in industrial installations such as membrane separa¬tion systems

Properties

MemKlen MC-120 is effective against a wide range of membrane foulants. In combination with high pH de-tergents, MemKlen MC-100 removes organic fouling and biofilms.

Appearance           : colourless liquid
Density (kg/ms)    : 1180
pH (neat)              : 11.4
Freezing point       : -9 °C
Flash Point            : none

These data are to be seen as typical values and should not be considered as specifications.

Feeding

The Icbina Water Technologies Membrane Technicians will define the optimum product dosage for any given water quality.
Always follow the membrane manufacturer's recom-mendations for pH, temperature and contact time. MemKlen MC-120 should be diluted with chlorine free water to give a 2 - 4% solution.. All feeding equipment used to handle this product should be constructed of stainless steel or good quality thermoplastic materials.

Handling

Wear suitable protective gloves and safety goggles. In case of contact immediately flush with plenty of water. After eye contact seek medical advice.
In case of spillage, absorb with sand or other absorbent materials and sweep up. Then flush the area with water.
Before use review the Material Safety Data Sheet for additional information.

Packaging

MemKlen MC-120 is available in 29 kg drums.

Regulatory Information:  Please refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.

Safety:  Icbina Water Technologies maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.

Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Icbina products in your facilities.